Please remember that if you have opened the safe with the key, you also have to lock it with the key, from then on using the code as usual. If the safe has been opened by the electronic (code) method, that to lock the safe door, you need to press the ‘ENTER’ and ‘key’ to electronically secure the safe.

If you have forgotten your code, use the manual override key to open the safe and re-set the code, by pressing the ‘enter’ and ‘key’ buttons on the safe.

Please make sure you are completing the set code procedure until it displays ‘good’, remembering that if you have opened the safe with the key you also have to lock it with the key, from then on using the code as usual.

This is a long serial number, which can be found underneath the ledge of the keypad on a white label. The format of the code is ‘POXXX…’ and there may additionally be a ‘JK’ code.

To set the code successfully, press the ‘ENTER’ key and ‘3’ simultaneously. It is easiest to first press and hold down the ‘ENTER’ button then press ‘3’ with your other hand. The ’SET CODE’ message will appear on the LCD screen, and you can go ahead and set the code in the normal manner.

If you have forgotten your code, use the manual override key to open the safe and re-set the code, by pressing the ‘enter’ and ‘key’ buttons on the safe.

To change this setting, you need to hold down "ENTER" and press "2" at the same time.